How a handful of affordable units can unlock more density, cost-saving concessions and less parking on your next project.
California’s State Density Bonus Law (Government Code Section 65915) is one of the most powerful tools available to a developer, and one of the most underused on small and mid-size projects. In exchange for setting aside a share of units as affordable, a project can build more units than local zoning allows, request concessions that lower cost and reduce parking requirements.
The law applies statewide, and cities must grant a qualifying request. Here is how it works and how to decide whether it fits your project.
How the Bonus Works
The bonus is a percentage increase over the base density allowed by local zoning. The larger the share of affordable units and the deeper the affordability, the larger the bonus. According to HCD’s April 2026 fact sheet:
Very low income: Share of base units: 5% to 15%; Density bonus: 20% to 50%
Low income: Share of base units: 10% to 24%; Density bonus: 20% to 50%
Moderate income (for-sale): Share of base units: 10% to 44%; Density bonus: 5% to 50%
Senior housing: Share of base units: Qualifying senior project; Density bonus: 20%
100% affordable: Share of base units: At least 80% lower income; Density bonus: 80%; no density limit within ½ mile of a major transit stop
For most projects the maximum bonus is 50%. Projects can stack additional bonuses by adding more very low- or moderate-income units on top of the base set-aside. Only the affordable units are income-restricted; the bonus units can be market rate.
Incentives and Concessions
Concessions are where the real value often sits. A concession is a reduction in a development standard or another change that produces identifiable cost savings, such as reduced setbacks, increased height, reduced open space or relief from an architectural requirement. The number available depends on the affordable share:
1 concession: Very low income: 5%; Low income: 10%; Moderate (for-sale): 10%
2 concessions: Very low income: 10%; Low income: 17%; Moderate (for-sale): 20%
3 concessions: Very low income: 15%; Low income: 24%; Moderate (for-sale): 30%
4 concessions: Low income: 16% lower income; Moderate (for-sale): 45%
5 concessions: 100% affordable projects
A city can deny a concession only on narrow grounds, such as a specific adverse impact on health or safety, or a conflict with state or federal law. The city carries the burden of making that finding.
Waivers
Waivers are separate from concessions and unlimited in number. If a local standard would physically prevent the project from being built at the density and with the concessions it is entitled to, the developer can request a waiver or reduction of that standard. Waivers are commonly used for height, setbacks, lot coverage and open space.
Parking Relief
Density bonus projects can request parking ratios lower than local code, inclusive of accessible and guest parking:
Studios and one-bedroom units: up to 1 space per unit.
Two- and three-bedroom units: up to 1.5 spaces per unit.
Four or more bedrooms: up to 2.5 spaces per unit.
Within ½ mile of a major transit stop: as low as 0.5 space per unit with qualifying affordability, and no requirement for 100% lower-income projects.
Separately, state law (AB 2097, Government Code Section 65863.2) generally prohibits cities from imposing minimum parking requirements on housing within ½ mile of a major transit stop. Parking is one of the most expensive parts of a multifamily project, so this relief alone can change a deal.
What to Weigh Before You Apply
Affordability term: affordable units carry long-term restrictions, generally 55 years for rentals and 45 years for for-sale units. Model the reduced rents or sale prices across the hold or sale.
Construction cost per unit: more units on the same land lowers land cost per unit, but taller or denser buildings can move you into a more expensive construction type. Price both before you commit.
Concessions you actually need: choose concessions that remove real cost or unlock real yield, then confirm them with a builder before design is final.
Local inclusionary rules: many cities already require affordable units. Units provided to meet those rules can often count toward the bonus as well.
How We Help
We model the project with and without the bonus, test which concessions and waivers produce real savings, and price the resulting building type so you know whether the extra units pay for themselves. Then we carry the plan through design, plan check and construction.
Planning a development?
Ramos Construction Group is a majority women-owned general contractor and developer based in Santa Ana. We provide site and zoning feasibility, development analysis, design coordination, permit expediting and general contracting for ground-up residential and mixed-use projects across Southern California.
Call (949) 688-3455, text (949) 394-4753 or visit rcgbuild.com to schedule a feasibility consultation.
Sources
California HCD, State Density Bonus Law fact sheet (April 2026): https://www.hcd.ca.gov/sites/default/files/docs/planning-and-community/density-bonus-law.pdf
Kassouni Law, California Density Bonus Law (July 2026): https://www.kassounilaw.com/2026/07/california-density-bonus-law-how-to-increase-development-potential/
This article is general information, not legal, financial or investment advice. Zoning, entitlement and permitting requirements vary by jurisdiction and change over time; confirm requirements for your site with the local planning and building departments.

